CISS

Demetrios V. Bandekas

D. Bandekas

I. Personal Information

Date of Birth

21/04/66

Place of Birth

Velestino, Magnesia, Greece

Home Address

Tel.

Nea Peramos,
64007, Kavala, Greece
0030 25940 29113

Office Address

 

Tel.& Fax

Kavala Institute of Technology,
Department of Electrical Engineering,
Ag. Loukas,
65404 Kavala, Greece
0030 2510 462275

Mobile Phone

0030 6977 449343

II. Education

2.1.  Dipl. in Electrical Engineering, Democritus University of Thrace, Department of Electrical & IT Engineering,1990.

2.2. PhD, Democritus University of Thrace, Department of Electrical & IT Engineering, 1994.


III. Teaching Experience

Sixteen (16) academic years teaching as follows:

September 1995 – June 1996, and  September 1996 – June 1997:
      As an Assistant Professor (with annual contract) taught the module ‘’Electrical Μachines’’, Department of Mechanical Engineering, Kavala Institute of Technology .

November 1995 – January 1996:
      The applicant covered modules of 200 hours at the Κ.Ε.Κ. Institute ‘Protagoras’, on seminars with ’’ Ο.Α.Ε.Δ.’’, for the company VΑLVΕ A.Ε., Xanthi, Greece.

October 1996 – June 1997:
      As a Lecturer (Π.Δ. 407/80), taught the modules below:

during the 8th semester of the academic year, Department of Electrical and IT Engineering of the D.U.T.

September 1997 – February 1998:
    As an Assistant Professor (with annual contract) taught the modules:

    at the Department of Electrical Engineering of Kavala Institute of Technology
 
March 1998 – January 2002:
As permanent Associate Professor of the Department of Electrical Engineering,
Kavala Institute of Technology taught the modules:

February 2002 – 31/8/06:
As permanent Associate Professor of the Department of Electrical Engineering,  
Kavala Institute of Technology taught the modules:

 
August 06 – currently occupied:
As permanent Associate Professor of the Department of Electrical Engineering,
Kavala Institute of Technology taught the modules:

IV. Research

Participation in Scientific Research Programs

1. ‘Investigation of the use of the system of phase coordinates on simulations network
     with  Multimachine Power systems for the study of non – symmetrical faults ’, 
     The Research Committee Δ.Π.Θ., 1990, duration- 5 months.
 
2. ‘Research-Study for the improvement of the power factor of the industries of
     Municipality of Rodopi, Thrace, Greece in order to achieve lower operational and   
     energy cost’, Municipality of Eastern Macedonia & Thrace,Greece,1993, duration
     6 months.

3. ‘Evaluation-Improvement of the academic schedule of the Departments of
     Electrical Engineering, Kavala Institute of Technology & TEI Heraclion Crete’,
     ΕΠΕΑΕΚ, Subprogram 3, Act 3.1.α, 1998-2000, duration 2,5 years.  

4. ‘Development of a practical manual for European machine guidelines and labor
     guidelines’, Socrates CDI project, 2000-2002, Διαπανεπιστημιακ  Research  
     Programme οf the Εuropean Union, 28027-IC-1-2000-1 BE- ERASMUS- DISS- 1  
     CDI SOCRATES PROJECT. 

5. ‘Modelling and Control of electric machines connected to the system of the
      production line of the electric power system’, ARCHIMEDES ΙΙ, ΕPΕΑΕΚ.
       
6.  ‘’Hybrid Technologies Separation’’, INTEREG III.  

7. ‘’Replace Electrical System Multiple rocket launcher of the Army System RM 70’’,
       ΓΕΣ-ΓΔΑΕ, 1/12/2010 – 31/10/2011.

8. “ Optimization of the sensitivity of the optical sensor of the type Al / a-SiC:
       H/c-Si (n) by thermal annealing ”, ΕΛΚΕ Kavala Institute of Technology.  

9. “Optimization of power factor in the operational area of Kavala,
         preparation and evaluation of project management”, ΕΛΚΕ Kavala Institute of
         Technology.
      
10. ‘’ 'Structure of Employment and Career of Kavala Institute of Technology’’,
          ΕΠΔΒΜ, 1/9/2010 – 31/8/2013.

11. ‘’ 'Quality Assurance Unit of Kavala Institute of Technology’’, ΕΠΔΒΜ,
        1/9/2010 – 31/8/2013.

12. ‘’ΕΤΕΙΚ: Supply of new or upgraded laboratory and technology
         Equipment and software of Kavala Institute of Technology’’, ΕΣΠΑ-ΠΕΠ,  
         Region Eastern Macedonia and Thrace , 1/1/2011 – 31/12/2011.

13. ‘’ "Monitoring system of abiotic and biotic factors  affect changes in forest and
          Agricultural land’’, ‘’ΣΥΝΕΡΓΑΣΙΑ’’, ΓΓΕΤ, 7/4/2011 – 31/12/2012.

14. ‘’JESTR’’, Upgrading of the scientific journal of Kavala Institute of

        Technology’’’’, Digital Convergence , 1/3/2011 – 30/9/2012.

V. Supervision of dissertations – member of the examination board.

1998 – currently

Α) Supervisor for the completion of a great number of dissertations.
 
Β) Member of the Examination Board, responsible for the assessment of a large number of projects and dissertations.

 

VI. Responsible of the Electro Technology Lab.

Responsible of the ElectroTechnology and Electric Measurements Lab of the Department of Electrical Engineering of Kavala Institute of Technology, contributed to the update and improvement of the lab equipments and of the organisation of the particular lab and of the seminars below:

VIIWork Experience.

Since 16/5/90, the applicant worked as a self employed with specialisation on Energetic Fields, conducted several Electro-Engineer Studies and installations, in the town of Xanthi, Thrace, Greece.

Αugust 1993 – December 1994:

The applicant worked out several Electro- Engineer Studies, while a soldier with specialization:
 a) technician of high power wireless and 
 b) IT programmer.
 

VIII. Managerial Occupations.

       1/9/1998 –  31/8/99
          Head of  Faculty  Electrotechnics & Electric Measurements,  
          Department of Electrical Engineering , Kavala Institute of Technology,Greece.

       1/10/99 – 31/8/2004 and 1/9/2007 - currently

1/9/2004 – 31/8/2004

  • Head of  Faculty  Electrotechnics & Electric Measurements, Department of Electrical Engineering, Kavala Institute of Technology, Greece.

1/9/2004 – 31/8/2007:
Member of the Research Board of Kavala Institute of Technology.

1/9/2004 – currently
Member of the  Technical Board of Kavala Institute of Technology

1/9/2008 – currently
Vice-president of Academic Affairs

    • Chairman of the Institute of Lifelong Learning
    • Chairman of the Committee on Academic Conduct
    • Chairman of the Quality Assurance Unit
    • Chairman  of Technical Council

IX. Scholarships- Scientific Unions – Special Seminars - Presentations

1. Scholarships

     -1990 – 1993:
    Scholar of Energy Systems Faculty of the Department of Electrical Engineering
    & IT Engineering , of Democritus University of Thrace, Greece. 

     - October 1991 – September 1992:
     Scholar of ERASMUS Program

2.  Memberships
   - Editor-in-Chief  of the ‘’Journal of Engineering Science and Technology Review’’
   - Member of the Editorial Board of the ‘’ ’ARPN Journal of Engineering and
    Applied Sciences’’
   - Member of the Assessment Board for the Monitoring of the Industrial Program for     
      the Municipalities of East Greece,P.E.P. 2000 – 2006.
   - Μember of the Monitoring Board of the program ‘ Information Society’, for the
     Municipalities of East Greece.
   - Μember of the Technical Chamber of Greece   
   - Μember of the Hellenic Electrical Engineering Society
   - Μember of the Who’s who in the World.
   - Μember of the New York Academy of Sciences.

 3.  Seminars

-  January 1992 -July 1992 :  
       Power Electronics I - Power Electronics  II - Power Electronics  III
       Electrical Machines Performance - Electrical Machines Design, Μsc, Department
       of Electronic and Electrical Engineering, University of Strathclyde, UK.

- October 1992 – December 1992:
   Seminar of (125) hours of Hellenic Electrical and Mechanical 
   Engineering Society  
    

  1. Lectures

     12/5/2003: Meeting of the Newspaper EXPRESS

Lecture with title: « Management of Energy Resources», Kavala

6/12/2003  Department of Mechanical & Industry Engineering, University of Thessalia, Volos, Greece.

Lecture with title:  «Modelling – Simulation and Automatic Control of Electric  Machines»

25-27/11/05: Development Congress of Kavala

Lecture with title: «Research and Innovation»

      Lecture with title: «Modeling and Simulation of Electrical Machines and Power 
      Systems».

-     27/11/08: Department of Electrical Engineering of Riga Technical University, 
      Riga –  Latvia.
      Lecture with title: «Modeling and Simulation of Electrical Machines and Power 
          Systems».

 

X. Research Projects.

A. Publications on scientific Journals

    1.  D. P. PAPADOPOULOS,  M. HAMED,  H. YASIN, and D.V.BANDEKAS,  
        ‘Application of the Sensitivity Concept to the Optimal Reactive Power
         Distribution in Power Systems’  Electric Power Systems  Research,
         Vol.  22, pp.  105-112, 1991.

    2.  D. P. PAPADOPOULOS, M. HAMED, AND D. V. BANDEKAS
        ‘A  Practical Concept for Evaluating the Insulation Level in
         Overhead  Power Transmission Lines’, Journal of the Franklin
          Institute, Vol. 329, No. 2 , pp. 273-281, 1992.

   3.   D. V. BANDEKAS and  D. P. PAPADOPOULOS,
        ‘Time Moment and Pade Approximation  Methods Appliend to the
         Order Reduction  of MIMO Linear Systems’, Journal of the
         Franklin Institute, Vol. 329, No.  3,  pp.  521-538, 1992.

   4.   D. P. PAPADOPOULOS,  D. V. BANDEKAS  and J.R. SMITH,
        ‘Control-Canonical-Form- Method Applied to Generating Systems to
          Impove Dynamic Stability Characteristics’,  Archiv fur
          Electrotechnik, Vol. 75, pp. 215-222, 1992.

   5.   D. P. PAPADOPOULOS,  D. V. BANDEKAS and J. R. SMITH,
        ‘Desing of Robust Excitation Controllers  for Synchronous
         Generators Using the Spectral and Control-Canonical-form
         Methods with Output Feedback’, Journal of the Franklin
         Institute, Vol. 330, No. 2, pp. 383-400, 1993.

   6.   D. P. PAPADOPOULOS, and D. V. BANDEKAS,
        ‘Routh Approximation Method Applied to Order Reduction of
         Linear MIMO systems’, Int. Journal Systems Science, Vol. 24,
         No. 1,  pp.  203-210 , 1993.

   7.   D. P .PAPADOPOULOS,  D. V. BANDEKAS and  J. R. SMITH,
        ‘Robust Excitation Controller Desing for Synchronous Generators
         Using  Output-Feedback’, European  Transaction on Electrical
         Power  Engineering (ETEP) , Vol. 3, No. 6, pp. 443-451, 1993.

  8.  D. V. BANDEKAS, D. P. PAPADOPOULOS and J. R. SMITH,
       ‘Adaptive Excitation Controller Desing for a Turbogenerator  in a
        Multimachine  Power System’, Archiv fur Elektrotechnik, Vol. 77,
        pp. 375-381, 1994.

   9.  D. P. PAPADOPOULOS, D. V. BANDEKAS and J. R. SMITH,
       ‘Enhancement of Synchronous  Generator Dynamic Stability
        Characteristics with Output Feedback’, Int. J.Acta Technica CSAV,
        Vol. 40,  pp. 103-117, 1995.

   10. D. V. BANDEKAS, ‘Robust Excitation Control Method Applied to a Gas –  
         Turbine Synchronous Generator in a Multimachine Power System’, Int. J. Acta
         Technica  CSAV,  Vol. 44,  pp. 421-433, 1999. 

   11. D. V. BANDEKAS, ‘Spectral Control Method Applied to a Hydro Generator in
         a Multimachine Power System’, Elektrie Int. Journal, Vol. 53, No.5-6, pp. 164-
         169, 1999.

   12. D. V. BANDEKAS, ‘Output – Feedback Controller Design in a Multimachine
         Power System’, Elektrie Int. Journal, Vol. 54, No. 5-6, pp. 170-176, 2000.

   13. D. V. BANDEKAS and H. HOUSMEKERIDIS,  ‘Optimal - Output Feedback
         Control for Synchronous Generator via Order - Reduction Method’,
         Elektrie Int. Journal, Vol. 54,  No. 7-9, pp. 267-277, 2000.

   14. D. V. BANDEKAS,  D. POGARIDIS, and P. ANTONIADIS, ‘Multimachine
         Power System Control with Algebraic Output Feedback Method’ Int. J. Acta  
         Technica CSAV, Vol. 46 , pp. 213-226, 2001. 

   15. N. ATHANASIADIS and D. V. BANDEKAS, ‘An Innovative solution for AC
         Drive Operation During Voltage Sags Using a Custom Power Device’,
         Electrical Engineering (Archiv fur Elektrotechnik), Vol. 84, No. 3,  pp. 137-142, 
         2002.

   16. D. V. BANDEKAS and N. ATHANASIADIS,  ‘Modelling and Simulation
         Method Applied in a Multimachine Power System’, Elektrie Int. Journal, Vol.
         56,  No. 5-8,  pp. 185-189, 2002.

   17. N. ATHANASIADIS and D. V. BANDEKAS, ‘Modelling and Validation of a
         New  Technique for the Dynamic Response of AC/DC Power Systems’, Elektrie
         Int. Journal, Vol. 56,  No. 5-8, pp. 190-195, 2002.

   18. G. TSIRIGOTIS, D. BANDEKAS, D. POGARIDIS, J. L. LAZARO,
         ‘Comparative Control of a Nonlinear First Order Velocity System by a Neural
          Network NARMA-L2  Method’, Elektronika  ir  Electrotechnika  (Electronics
          and Electrical Engineering), Vol. 6(55), pp. 5 –8, 2004.

   19. G. TSIRIGOTIS, D. BANDEKAS, D. POGARIDIS, J. L. LAZARO, ‘The
         Anticipatory Aspect in Neural Network Control ’,Elektronika  ir Electrotechnika
         (Electronics and Electrical Engineering), Vol. 2(58), pp. 10 – 13, 2005.
       
   20.  D. V. BANDEKAS, G. TSIRIGOTIS, P. ANTONIADIS, Ν. VORDOS, ‘A
          Robust Controlller design for  a Multimachine Power System’,  Elektronika  ir  
          Electrotechnika (Electronics and Electrical Engineering), Vol.  1(65), pp. 20             
          – 24, 2006.

   21.  L. MAGAFAS, J. KALOMIROS, D. BANDEKAS and G. TSIRIGOTIS, 
         ‘Optimization of the Electrical Properties of Al/a-SiC:H Schottky Diodes by
          means of Thermal Annealing of a-SiC:H thin Films’, Microelectronics Journal,
          (Elsevier) Vol. 37, pp. 1352 – 1357, 2006.

   22. L. MAGAFAS, D. BANDEKAS, A.K. BOGLOU and A.N.
         ANAGNOSTOPOULOS, ‘Electrical properties of annealed a-SiC:H thin films’,  

Journal of Non-CrystallineSolids, Vol. 353, Issues 11-12,  pp. 1065-1069, 
         2007.

   23.  L. MAGAFAS, C. MERTZANIDIS, D. BANDEKAS, N. ATHANASIADIS, 
         ‘Thermal annealing effects on the optical and electrical properties of a-SiC: thin
          films sputtered at different hydrogen flow rates’, Journal of Optoelectronics and
         Advanced Materials, Vol. 9, No. 7, pp. 2030-2035, 2007.

   24. D. BANDEKAS, N. VORDOS, K. TARCHANIDIS, L. MAGAFAS, G.
         TSIRIGOTIS,  ‘’ Optimum Selection Based on the Energy Capacity Between
         Different Types of  Renewable Sources Using a Controller, J. Electronics and
         Electrical Engineering, Vol. 8(80), pp. 9 – 12, 2007.

   25. E. STATHAKIS, D. BANDEKAS, A. KARASAVVOGLOU, P
         ANTONIADIS, M. NIKOLAIDIS, P. ARSENOS, ‘’ Investment choices,  
         manufacturing strategies  and  competitiveness of the manufacturing enterprises:
         An empirical research in the region of Thrace’’, International Research Journal
         of Finance and Economics, Issue 16, pp. 143-161, 2008.

   26. E. STATHAKIS, and D. BANDEKAS, ‘’An Empirical Research on the Topic
          of the Draw up and Publish Divisional Financial Reports (DFR’s) by not Listed
          Thracian Manufacturing Firms (TMF’s)’’, International Research Journal of
          Finance and Economics, Issue 23, pp. 171-184, 2009.

   27.  J. G. FANTIDIS, K. POTOLIAS, D. V. BANDEKAS and N. VORDOS,
        ‘’ Non destructive testing of medium and high voltage cables with a
            Transportable radiography system’’, Journal of Engineering Science and 
            Technology Review, Vol. 3(1),  pp. 89-94, 2010.

   28.  C. POTOLIAS, E. STATHAKIS, D. V. BANDEKAS  and  N. VORDOS,
           ‘’ An Evaluation of the Factors Influence the Electric Power Production from   
            Biomass in the Certain Area of  Kavala Greece’’, ARPN Journal of  
            Engineering and Applied Sciences, Vol. 5,  Νο. 10, pp. 65-73, 2010. 

   29. K. KARAKOULIDIS, K. MAVRIDIS, D. V. BANDEKAS, P. ADONIADIS,
         C. POTOLIAS and N. VORDOS, ‘’Techno-economic analysis of a stand alone
         hybrid photovoltaic-diesel–battery- fuel cell power system, Renewable Energy,
         Vol.36, Issue 8, pp. 2238-2244, 2011.

   30.  A. K. BOGLOU,  D. V. BANDEKAS,  D. I. PAPPAS,  and C. POTOLIAS,
          ‘’ Optimal excitation controller design for wind turbine generator using Η
               control technique’’,  Journal of Engineering Science and Technology Review,
          Vol. 4(1),  pp. 43-49, 2011.

   31.  J. G. FANTIDIS, C. POTOLIAS, and  D. V. BANDEKAS, ‘’Wind Turbine  
         Blade  Nondestructive Testing with a Transportable Radiography System’’,
         Science and Technology of Nuclear Installations’’, Vol. 2011, Article ID
         347320, 6 pages,2011.

 

B.  Conferences

32. D. P. PAPADOPOULOS,  D. V. BANDEKAS and J. R. SMITH,
   ‘Excitation Controller Design of a Synchronous Generator Using Output   
    Feedback’, International Aegean Conference on Electrical Machines and Power  
    Electronics, ACEMP’92, Kusadasi, Turkey,Vol. 1/2, pp. 556-561, 1992.

33. D. P. PAPADOPOULOS,  D. V. BANDEKAS and  J. R. SMITH,
   ‘Excitation Controller Desing of a Synchronous Generator Using the Spectral and  
    Control-Canonical-Form   Methods’, International Conference on Electrical  
    Machines, UMIST, Manchester, U.K. , pp. 888-892, 1992.

34. D. V. BANDEKAS,  D. P. PAPADOPOULOS, and  J. R. SMITH,
   ‘Adaptive Excitation  Controller Design for Turbogenerator in Multimachine Power  
    Systems’, Seventh International Conference on Electrical Machines and Drives,   
    ELMA’93, Varna , BULGARIA, October 7-9, pp.77-84,1993.

35. N. ATHANASIADIS, D. V. BANDEKAS, L. MAGAFAS and E.
    ATHANASIADIS, ‘Modelling and Application of Facts Devices at the
    Interconnected South East Europian Region’, Sixth IASTED International  
    Conference, European Power and Energy Systems,   Rhodes, GREECE, June
    26-28, pp. 57- 62, 2006.

36. L. MAGAFAS, J. KALOMIROS, D. V. BANDEKAS
   ‘Optimization of the Electrical Properties of Al/a-SiC:H Schottky Diodes by
     means of Thermal Annealing of a-SiC:H thin Films’, 11th  Hellenic Physics 
     Conference, Larisa, Greece, 2006.

37.  A. K. BOGLOU, D. V. BANDEKAS and C. POTOLIAS, ‘’Excitation Controller  
 Design for Wind Turbine Generator Using Control’’, 9th WSEAS  International  
 Conference on Automation and Information (ICAI’08), Bucharest, Romania, June
 24-26,2008.

C. PHD Thesis

38. ‘Dynamic behavior analysis of multimachine electromechanical system with
       phase coordinates (a b c )’, Democritus University of Thrace, Department of
       Electrical & IT Engineering, 1994.

 D.  Lecture Notes

39.  Prepared lecture notes for the students of the 4th semester of the Academic Year  
       of the Department of Electrical Engineering, Kavala Institute of Technology,
       topic: ‘Modelling – Simulation and Automatic Control of the Electric Machines
       and Electric Power  Systems’ total number of pages 117.

40. Edited Book: “Principles of  Measurement Systems- Basic Elements” ,
      J.P. Bentley,  Pearson Prentice Hall, 2004’’.